10.2 Service Diagnosis in PLC Mode
10.2.1 The TABLE Function
The TABLE function provides the possibility to display the logic states of of the inputs, outputs,
markers, counters and timers in a table.
Call
The table is called after the corresponding soft key has been pressed.
The display mode for byte, word and doubleword tables can be switched between HEX and
DECIMAL.
With the cursor keys or the GOTO key followed by an entry, the operands can be selected within
the table.
The following describes the testing of PLC inputs and outputs for which the TABLE function can
be very helpful.
10 – 76
Shift the soft-key row
Call TABLE function
Shift the soft-key row
HEIDENHAIN Service Manual iTNC 530