Advanced->Multipath - Javad Maxor User Manual

1.
•
•
2.
3.
www.javad.com
Click the Loop Management tab and set the following parameters, then
click Apply (Figure 3-7):
Enable Common Tracking – enable
Static mode – enable (disable for Rover receivers)
Figure 3-7. Advanced->loop Management
Set up each antenna and receiver as described in "Maxor Receiver Setup" on
page 3-2.
Begin your survey.
Figure 3-6. Advanced->Multipath
S E T U P A N D S U R V E Y
Surveying with the Maxor
Maxor User's Manual 3-9