Power Management; Maxor Charging - Javad Maxor User Manual

C O N F I G U R A T I O N
2
Powering the Maxor
Tip: View the pattern of blinks of the BATT LED to make
sure the receiver takes power from the external
source.
Solid light – an External power supply is used and
the batteries are not being charged.
Blinking once a second – an external power supply
is used and the batteries are being charged.

Power Management

Use Javad's PCView software to manage the receiver's power. The complete
description of PCView exceeds the scope of this manual, but can be found in the
2-4 Maxor User's Manual
Figure 2-1. Maxor Charging
www.javad.com