Javad TRIUMPH-1 Configuration Example

Base and rover setup via tracy

Hide thumbs Also See for TRIUMPH-1:

Operator's manual (162 pages)

Configuration example (14 pages)

Operator's manual (96 pages)

page of 14

/ 14
Bookmarks

Quick Links

Download this manual See also: Operator's Manual

Base and Rover Setup

via Tracy

Configuration Example

Version 1.0

Last Revised December 14, 2010

All contents in this manual are copyrighted by JAVAD GNSS.

stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express

written consent from JAVAD GNSS.

Summary of Contents for Javad TRIUMPH-1

Page 1 Version 1.0 Last Revised December 14, 2010 All contents in this manual are copyrighted by JAVAD GNSS. All rights reserved.The information contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express...
Page 2 www.javad.com...
Page 3 “HPT435 as Base TRIUMPH-1 as Rover” Application Notes, available on the www.javad.com. 2. Connect the TRIUMPH-1 receiver to computer. See for details the TRIUMPH-1 Operator’s Manual. 3. Connect the external HPT435 UHF radio to receiver’s port B with cable Accessory Data- Ser cable, ODU-7/D15 (1.8 m) p/n 14-578108-01.
Page 4 5. Turn on the TRIUMPH-1 receiver 6. Start Tracy RTK in the Lite view. 7. Connect you TRIUMPH-1 and controller using Bluetooth. • If you have once connected the receiver with Victor, Tracy will find it automatically; • Otherwise click to the connection button to search bluetooth receiver.
Page 5: Base Station Setup
Base and Rover Setup via Tracy Base Configuration (TRIUMPH-1 with external UHF Modem) Base Station Setup Base Station Setup 1. Click Survey parameters button 2. Click Start Base tab (Figure 1-4). This tab allows the user to apply receiver as the base, selecting receiver style from the list (how to create new style see “How to create new/edit...
Page 6 2. Start Tracy RTK in the Lite view. How to switch between Lite and Extended view see on page 8. 3. Connect you TRIUMPH-1 and controller using Bluetooth. • If you have once connected the receiver with Victor, Tracy will find it automatically;...
Page 7 Base and Rover Setup via Tracy Rover setup (TRIUMPH-1 with Internal Radio) Base Station Setup 5. Click Start button to start survey. In the type drop-down list box select Point to survey a point, or Trajectory for trajectory surveying (Figure 1-8) •...
Page 8 2. Click the Configuration button. 3. In the Receiver tab click the button to add new receiver style or button to edit the existing receiver style. 4. Specify the new style name, add the description and click Next: Figure 1-10. Style name www.javad.com...
Page 9 5. Select the correction source and click Next: Figure 1-11. Correction source 6. Specify the base modem’s parameters, such as modem type, port modem is connected to, baud rate, and type of corrections. Click Next: Figure 1-12. Base modem parameters www.javad.com...
Page 10 Figure 1-13. UHF modem settings • Protocol - Simplex • Modulation - DBPSK • Link - 12.5 kHz • Output power - up to 35 W. 8. In the next screen specify the TDMA multibase mode parameters: Figure 1-14. TDMA multibase mode www.javad.com...
Page 11 Base and Rover Setup via Tracy How to create new/edit receiver style Base Station Setup 9. Select the base antenna: Figure 1-15. Base antenna 10. Select the rover antenna: Figure 1-16. Rover antenna www.javad.com...
Page 12 Base and Rover Setup via Tracy How to create new/edit receiver style Base Station Setup 11. Specify the rover settings: Figure 1-17. Rover settings 12. Click Finish. The new receiver style has been successfully created/updated. Figure 1-18. Style has ben updated www.javad.com...
Page 13 Base and Rover Setup via Tracy How to create new/edit receiver style Base Station Setup www.javad.com...

Javad TRIUMPH-1 Configuration Example

Quick Links

Related Manuals for Javad TRIUMPH-1

Summary of Contents for Javad TRIUMPH-1

Page 5: Base Station Setup