Chapter 2: Configuration - Javad Maxor User Manual

C
This chapter discusses how to configure the Maxor, including instructions for
charging the receiver, connecting to a computer, configuring the receiver's
MinPad interface, on-board radio modem, and Bluetooth module. This
information is described in the following sections:
Chapter Tip: Before you can use your Maxor receiver, you need to:
1.
2.
3.
www.javad.com
ONFIGURATION
Powering the Maxor . . . . . . . . . . . . . . . . . . . . page 2-2
Charging the Maxor. . . . . . . . . . . . . . . . . . . . . page 2-7
Connecting the Maxor and a Computer. . . . . . page 2-8
Maxor Configuration . . . . . . . . . . . . . . . . . . . page 2-12
MinPad Configuration . . . . . . . . . . . . . . . . . . page 2-15
Radio Configuration . . . . . . . . . . . . . . . . . . . page 2-21
Bluetooth Module Configuration. . . . . . . . . . page 2-31
Collecting Almanacs . . . . . . . . . . . . . . . . . . . page 2-34
Charge the batteries. See "Charging the Maxor".
Configure the various parts of your receiver. See:
• "Connecting the Maxor and a Computer",
• "Maxor Configuration",
• "MinPad Configuration",and
• "Radio Configuration" (if applicable).
Collect an almanac. See "Collecting Almanacs".
2
Maxor User's Manual 2-1