Download Print this page
Javad TRIUMPH-1 Configuration Example

Javad TRIUMPH-1 Configuration Example

Gsm base and rover
Hide thumbs Also See for TRIUMPH-1:

Advertisement

Quick Links

GSM Base and Rover
Configuration Example
for TRIUMPH-1, SIGMA, and GISmore Receivers
Version 1.1
Last Revised August 18, 2009
All contents in this manual are copyrighted by JAVAD GNSS.
All rights reserved.The information contained herein may not be used, accessed, copied,
stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express
written consent from JAVAD GNSS.

Advertisement

loading

Summary of Contents for Javad TRIUMPH-1

  • Page 1 Version 1.1 Last Revised August 18, 2009 All contents in this manual are copyrighted by JAVAD GNSS. All rights reserved.The information contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express...
  • Page 2 www.javad.com...
  • Page 3: Base Station Configuration

    GSM B & R OVER ONFIGURATION XAMPLE Base Station Configuration 1. Start ModemVU. 2. Select TRIUMPH-1X Internal Radio and click OK (Figure 2-1). Figure 2-1. ModemVU. Options window 1. For SIGMA receiver select SIGMA; for GISmore select GISmore www.javad.com...
  • Page 4 Figure 2-3. ModemVU ALPHA Internal Radio selection 6. In the Master/Slave tab set the following parameters, and click Apply (Figure 2-4): Figure 2-4. Master/Slave tab settings • Dial number: empty • Send Time Out: 2 • Receive Time Out: 5 www.javad.com...
  • Page 5 Figure 2-5. General tab settings 8. Wait until the modem will establish connection with net. The Modem status will be ready (at first detecting, registration, than ready). Figure 2-6. Modem status “ready” 9. Quit ModemVU by clicking Exit button. www.javad.com...
  • Page 6 10. Start TriVU. Select port the receiver is connected to and click OK (Figure 2-7). Figure 2-7. TriVU. Selecting port 11. Click Configuration Receiver. 12. In the Base tab click the Get from receiver button. Reference geodetic coordinates appear. Click Apply (Figure 2-8). Figure 2-8. Base tab www.javad.com...
  • Page 7 GSM Base & Rover Configuration Example Base Station Configuration 13. In the Ports tab Serial subtab set the Port B Output mode to RTK CMR, and click Apply, then OK (Figure 2-9). Figure 2-9. Rover tab 14. Quit TriVU. www.javad.com...
  • Page 8: Rover Configuration

    3. Select the port receiver is connected to and click Connect (Figure 2-11). Figure 2-11. ModemVU. Connection 4. Set the Radio and GSM parameters to OFF and click Apply. 1. For SIGMA receiver select SIGMA; for GISmore select GISmore www.javad.com...
  • Page 9 6. In the Master/Slave tab set the following parameters, and click Apply (Figure 2-4): Figure 2-13. Master/Slave tab settings • Dial number: phone number of the Base station’s SIM card. • Send Time Out: 2 • Receive Time Out: 5 www.javad.com...
  • Page 10 Wait until the connection with the Base will be established: the Modem status will be at first dialing, than connected with the connection baud rate value. Figure 2-15. Modem status “connected” 9. Quit ModemVU by clicking Exit button. www.javad.com...
  • Page 11 10. Start TriVU. Select port the receiver is connected to and click OK (Figure 2-7). Figure 2-16. TriVU. Selecting port 11. Click Configuration Receiver. 12. In the Positioning tab set RTK fixed Mode, then click Apply (Figure 2-17). Figure 2-17. Positioning tab www.javad.com...
  • Page 12 13. In the Rover tab set RTK fixed mode (Figure 2-18), then click Apply: Figure 2-18. Rover tab 14. In the Ports tab Serial subtab set the Input mode for port C to CMR, then click Apply and OK (Figure 2-19). Figure 2-19. Ports tab www.javad.com...
  • Page 13 GSM Base & Rover Configuration Example Rover Configuration 15. The receiver will obtain the RTK Fixed solution (Figure 2-20). Figure 2-20. TriVU. RTK fixed www.javad.com...
  • Page 14 1731 Technology Drive, San Jose, CA 95110 USA Phone: +1(408)573-8100 Fax: +1(408)573-9100 www.javad.com Copyright © JAVAD GNSS, Inc., 2009 All rights reserved. No unauthorized duplication.

This manual is also suitable for:

SigmaGismore