Manual Mode - Command Responses - Javad Maxor User Manual

C O N F I G U R A T I O N
2
Radio Configuration
To create a daisy chain between the receiver's port (A or D) and the Maxor
4.
PDL modem, type each of the following commands, pressing Enter (or
clicking Send command) after each command.
The Manual Mode screen will show RE002%% in response to each of these
commands. When finished, you should see a window that looks like
Figure 2-23.
Tip: Save this set of commands to a script file and load
this file later to the receiver with a single operation.
To create a script file, see "Creating Scripts" on
page A-1.
Click Disconnect (Figure 2-23).
5.
Run the PDL Radio Configuration Program (pdlconf.exe) from Pacific Crest
6.
(Figure 2-24).
2-22 Maxor User's Manual
%%set,dev/ser/c/rate,38400
%%set,dev/ser/c/echo,/cur/term
%%set,dev/ser/c/imode,echo
%%set,cur/term/eoff,QUIT
%%set,cur/term/echo,/dev/null
%%set,cur/term/imode,echo
%%set,cur/term/echo,/dev/ser/c
Figure 2-23. Manual Mode – Command Responses
www.javad.com