Otto Bock 8E38 8 Series Instructions For Use Manual page 28

matically performed up to the maximum gripping force (130 N) as needed. FlexiGrip takes effect
starting at the maximum gripping force. When there is no longer a load, the SensorHand Speed
grips with the previous gripping force again.
Control with two electrodes
Opening: Proportional via the OPEN electrode.
Closing: At maximum speed with short muscle signal at any level over the ON threshold on
the CLOSE electrode.
Open
Muscle signal via the electrode
Speed:
Proportional, 15 mm/s to 300 mm/s
Initial gripping force
10 N
Control with one electrode and one switch
Opening: Proportional via the OPEN electrode.
Closing: At maximum speed by briefly activating the switch.
Open
Muscle signal via the electrode
Speed:
Proportional, 15 mm/s to 300 mm/s
Initial gripping force
10 N
Control with one switch
This program can be used in combination with any MyoBock switch.
Opening: At maximum speed as long as the OPEN side of the switch is activated. The hand
then remains open.
Closing: At maximum speed by activating the CLOSE contact of the switch.
Open
The hand opens as long as the OPEN side of
the switch is activated
Speed:
Proportional, 15 mm/s to 300 mm/s
Initial gripping force
28
Close
Muscle signal via the electrode
Speed:
Constant, 300 mm/s
Automatic gripping force
readjustment
Up to max. 130 N
Close
Signal via the CLOSE side of the switch
Speed:
Constant, 300 mm/s
Automatic gripping force
readjustment
Up to max. 130 N
Close
Signal via the CLOSE side of the switch
Speed:
Constant, 300 mm/s
Automatic gripping force
readjustment
FlexiGrip function
Takes effect starting at the
maximum gripping force
FlexiGrip function
Takes effect starting at the
maximum gripping force
FlexiGrip function