Using The Signal-Type Menu; Procedure: Select Signal-Type Menus On The Performance Monitoring Screen; Figure 8-4 Signal-Type Menus For A Ds3Xm-6 Card - Cisco 15454-TCC - Network Processor Card Operation Manual

Using the Performance Monitoring Screen

8.1.4 Using the Signal-Type Menu

Use the signal-type menus to monitor PMs for near-end or far-end signals on a selected port. Different
signal-type menus appear depending on the card type and the circuit type. The appropriate types (DS1,
DS3, VT path, STS path, OCn section, line) appear based on the card. For example, the DS3XM has DS3,
DS1, VT path, and STS path PMs.
Monitoring screen for a DS3XM-6 card.
Figure 8-4

Procedure: Select Signal-Type Menus on the Performance Monitoring Screen

Open the electrical or optical card of choice. Double-click the card's graphic in the main (node) view or
Step 1
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
From the card view, click the Performance tab.
Step 2
Click the signal-type menu. (For example, the DS3XM card has menus labeled DS3, DS1, VT, and STS.)
Step 3
Select a port using the signal-type menu.
Step 4
Cisco ONS 15454 Installation and Operations Guide
8-6
Figure 8-4
Signal-type menus for a DS3XM-6 card
Signal-type menus
Chapter 8
shows the signal-type menus on the Performance
Performance Monitoring
November 2001