Starting, Stopping, And Confirming The Snmp Service; Snapshot Of Traps During Startup - Cisco Unified Contact Center Express Servicing And Troubleshooting Manual

Chapter 2 Simple Network Management Protocol Support
Click OK to apply your changes and exit the SNMP Service Properties window.
Step 12

Starting, Stopping, and Confirming the SNMP Service

In general, the SNMP Service will always be running. To confirm that the SNMP Service is running and
to restart it or stop it, if necessary, follow these steps:
From the Windows desktop, chooseStart > Settings > Control Panel
Step 1
Double-click Administrative Tools.
Step 2
Double-click Services.
Step 3
The Services window appears.
Step 4 Look at the Status field in the SNMP Service row.
If this field displays "Started," the SNMP Service is running. If this field is blank, the SNMP Service is
not running.
To start the SNMP Service, right-click SNMP Service and choose Start.
To stop the SNMP Service, right-click SNMP Service and choose Stop.

Snapshot of Traps During Startup

The following example shows a snapshot of traps generated by CRS during startup. To view this file
more clearly in Acrobat, use the Zoom In icon on the Acrobat menu bar to increase the text size.
Cisco Customer Response Solutions Servicing and Troubleshooting Guide, Release 5.0(1)
Setting up SNMP Traps
2-9