Table of Contents
Advertisement
Chapter 2
Configuring the Cisco Unified IP Phone for MIDlets
h.
Select the Enable check box.
Step 6
Click Save to save your changes.
Step 7
Configuring the MIDlets IP Phone Interface
The Cisco Unified IP Phone auto-configures the IP address of the CTS; the CTS obtains the phone IP
address using continuous data protection (CDP) data and the CTS sends the command to the
Cisco Unified IP Phone to start the MIDlet. The system launch command specifies the IP address of the
CTS.
To configure each Cisco Unified IP Phone 7970/7975 to run the MIDlet IP phone interface, follow these
steps:
Log in to the Cisco Unified CM Administration interface.
Step 1
From the Navigation drop-down menu in the upper right corner, select Cisco Unified CM
Step 2
Administration and click Go.
From the Device drop-down menu, select Phone. The Find and List Phones Page appears.
Step 3
Search for a phone using the fields provided or select a phone from the drop-down menu and click Find.
Step 4
A list of devices appears.
Click on a device in the Device Name (Line) column. The Phone Configuration page for that device
Step 5
appears.
From the Related Links drop-down menu in the upper right corner, select Subscribe/Unsubscribe
Step 6
Services and then click Go. The Subscribed Cisco IP Phone Services window for that device appears.
Step 7
In the Service Information box, select MIDlet IP phone service from the Select a Service drop-down list
and click Next. The Subscribed Cisco IP Phone Services window is updated with configurable Service
Name and ASCII Service Name fields.
Step 8
Click Subscribe to save your settings or Back to return to the original Subscribed Cisco IP Phone
Services window.
If the phone is already subscribed to an older MIDlet version, follow these steps:
a.
b.
CTS Release 1.7 and Later
Step 9
If you are changing the Cisco Unified IP phone interface from an existing CTS interface to the MIDlet
interface, follow these steps in the External Data Locations Information box on the Phone Configuration
page:
a.
b.
c.
See the
Step 10
Click Save to save your settings.
OL-21851-01
Service Version—Enter the version number.
Unsubscribe the phone from the older service by proceeding to
Subscribe the phone to the new IP phone service that you created in the
Service in Cisco Unified CM" section on page
Remove the Service URL from the phone configuration. (Leave blank to use default settings.)
Remove the Idle URL from the phone configuration. (Leave blank to use default settings.)
Set the Idle Timer to 0 in the phone configuration. (Leave blank to use default settings.)
"Setting Phone URL Parameters for MIDlets" section on page 2-18
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Step
9.
"Creating MIDlets IP Phone
2-16.
for more information.
Configuring MIDlets
2-17
Advertisement
Chapters
Table of Contents
