Retrieving And Sending Messages In Voiceview Express - Cisco Unity Express 8.0 Voice-Mail System User Manual

Retrieving and Sending Messages in VoiceView Express

If your voice mailbox contains an expired message, press Listen, Save, or Delete for each expired
Step 6
message.
The Personal Mailbox menu appears.
Logging In if Your PIN is Expired
To log into VoiceView Express if the PIN Expired window appears:
Press OK to accept the message about your expired PIN.
Step 1
On the Change PIN window, use the dial pad to enter a new PIN.
Step 2
Choose Confirm and use the dial pad to enter your new PIN again.
Step 3
Step 4 Press Submit. The Login window appears. See the
page
Logging In Limitations for VoiceView Express
Cisco Unity Express is subject to two erroneous login limits as set by your system administrator.
•
•
Retrieving and Sending Messages in VoiceView Express
The section contains the following information and procedures:
•
•
•
•
•
Information About Soft Keys for Voice-Mail Messages
Tip To display additional soft keys, press the More soft key.
Cisco Unity Express 8.0 Voicemail User's Guide for Advanced Features
34
33.
There may be a limit on the number of incorrect consecutive log ins allowed, after which the system
administrator is required to restore the user's log in rights.
Depending on the configuration by your system administrator, login may be temporarily disabled
for the user for a time period after several consecutive unsuccessful log in attempts.
Information About Soft Keys for Voice-Mail Messages, page 34
Listening to Voice Messages, page 36
Printing a Fax, page 36
Forwarding a Fax or Voice Message, page 37
Sending Voice Messages, page 38
"Logging In To VoiceView Express" section on
OL-23857-01