Configuring The Cisco Tms Settings Of The Resource Database (All Versions); Figure 15: Checking The Admin And Create Resource Check Boxes - Cisco TELEPRESENCE MANAGEMENT SUITE EXTENSION - INSTALLATION GUIDE FOR IBM LOTUS NOTES 11.3.1 Installation And Getting Started Manual

Configuring the Cisco TMS settings of the Resource Database
(all versions)
1. Open Domino Administrator using a server administrator ID.
2. Open the resource reservation database that you created in the previous steps by going to File >
Application > Open and select the server on which the database was created. Then select the
database as you named it in the notes.ini file (default name: ―Video Conference Resources‖), and
click Open.
3. Go to File > Application > Access Control to open the Access Control List window.
4. Select the current user ID from the list, and select the Admin and Create Resource check boxes
to add the current user ID to these roles for the database.
Optionally, you can add additional users to these roles to enable those users to be able to modify
the configuration document and add additional resources. Adding additional user roles can also
be done post-installation.
In some installations, one or both of the check boxes might be missing. See the
TroubleshootingError! Reference source not found. chapter of this document for more
information.

Figure 15: Checking the Admin and Create Resource check boxes

5. Close the database and re-open it. You now see a TMS Admin choice on the left side of the
database.
6. Open the Cisco TMS Admin document to configure the integration settings.
7. Enter the Domino service account in the Service Account field.
8. Enter the IP or DNS name of the Cisco TMS Server in the Host name field.
9. Enter the username and password of the TMS Service Windows account (including the domain, if
applicable).
Cisco TMS Extension for IBM Lotus Notes – Installation and getting started guide
Installation
Page 21 of 45