Configuring Network Security; Configuring Mac Address-Based Traffic Blocking - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Configuring Network Security

This chapter contains network security information unique to the Catalyst 6500 series switches, which
supplements the network security information and procedures in these publications:
•
•
Note For complete syntax and usage information for the commands used in this chapter, refer to these
publications:
•
•
This chapter consists of these sections:
•
•
•

Configuring MAC Address-Based Traffic Blocking

To block all traffic to or from a MAC address in a specified VLAN, perform this task:
OL-11439-03
Cisco IOS Security Configuration Guide, Release 12.2, at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/fsecur_c.html
Cisco IOS Security Command Reference, Release 12.2, at this URL
http://www.cisco.com/en/US/docs/ios/12_2/security/command/reference/fsecur_r.html
The Catalyst Supervisor Engine 32 PISA Cisco IOS Command Reference, Release 12.2ZY, at
this URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/cmdr
ef.html
The Release 12.2 publications at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_installation_and_configuratio
n_guides_list.html
Configuring MAC Address-Based Traffic Blocking, page 30-1
Configuring TCP Intercept, page 30-2
Configuring Unicast Reverse Path Forwarding Check, page 30-2
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
30
C H A P T E R
30-1