Table of Contents
Advertisement
IV.
GAUGES AND CDM DISPLAY
a. Check engine temperature gauge and fuel gauge
are working (M205, M155 ONLY).
DISPLAY
Engine / Windrower Functions
b. Check CDM display i s working by pushing
SELECT on CDM, or SELECT button on GSL.
V.
ELECTRICAL
Push the SE LECT button on GSL, o r SELECT
switch on CDM to display VOLTS. The display
indicates the condition of the
alternator. Refer to following table.
IGNITION
ENGINE
Running
ON
Shutdown
Display flashes voltage reading with
single loud tone.
30 minutes until condition fixed.
Form 169242
PRE-DELIVERY CHECKS
battery and
INDICATED
READING
CONDITION
13.8–15.0
Normal.
> 16.0
Regulator Out
of Adjustment.
See Note.
Alternator Not
Working,
< 12.5
OR
See Note.
Regulator Out
of Adjustment.
12.0
Battery Normal.
NOTE
Repeats every
109
Revision F
Advertisement
Table of Contents
