Table of Contents
Advertisement
IMPORTANT
To prevent d amage to th e lift system
when lowering header lift linkages
without a header or weig ht box
attached to windrower, ensure that float
engagement pin is installed in storage
location (A), and not installed at hol e
location (B).
If not installed, attach draper header boots
(supplied with header) to windrower lift linkage as
follows:
D
a. Remove pin (C) from boot (D).
Form 169542
UNLOADING AND ASSEMBLY
A
B
C
D
b. Locate boot (D) on lift linkage (E), and re-install
pin (C). Pin may be installed from either side of
boot.
c. Secure pin (C) with hairpin.
d. Repeat for opposite side.
70
E
C
Revision F
Advertisement
Table of Contents
