MacDon M 2009 Series Assembly Instructions Manual page 34

RED
7. Locate two hoses (red ties) inside frame.
8. Route RH hose behind bundle.
9. Remove caps, make connection, and tighten
fitting.
10. Push hose into frame.
11. Retrieve long hose 11 9328 (white tie), and
route through hole in LH frame.
12. Remove caps on hose, and valve block fitting
(white tie), and make connection. Ti ghten
fitting.
Form 169542
UNLOADING AND ASSEMBLY
119328 WHITE
WHITE
13. Remove the caps from three fittings (blue,
orange, and yellow ties) o n the valve b lock
from inboard side of frame.
14. Loosen bolts, and mov e valve block to
improve access through hole in fram e for
wrenches when tightening fittings.
BLUE
ORANGE
15. Retrieve
connections on valve block. Tighten fittings.
16. Re-position valve block, and re-tighten bolts.
34
ORANGE
BLUE
YELLOW
YELLOW
matching hoses and
(continued next page)
make
Revision F