Table of Contents
Advertisement
g. Attach railings to platform with 1/2 inch x 0.75
locking bolts provided. Tighten bolts to 75 ft·lbf.
(102 N·m).
h. Slowly close platform, and check that vertical rail
tubes are parallel with cab posts when viewing
from the rear. Laterally adjust king pin mounting
as required.
Form 169542
UNLOADING AND ASSEMBLY
41
i.
Check that rubber bumper is contacting the
frame, and that front of platform is contacting the
guide.
j.
Adjust platform horizontally with the 1/2 in. x 2.25
bolt as required.
k. If major adjustment is required, re-locate steering
arm into either of the other holes on the bracket.
l.
Tighten the three main beam attachment bolts to
80 ft·lbf (108 N·m).
Revision F
Advertisement
Table of Contents
