Table of Contents
Advertisement
i.
Install pin (A) through each boot and foot, and
secure with hairpin.
IMPORTANT
Ensure pin (A) is fully inserted, and hairpin
is installed behind bracket.
j.
Remove pin (F) from storage position in linkage,
and insert in hole (G) to engage float sprin gs.
Secure with hairpin.
k. Disengage lift cylinder stops.
l.
Start engine, and activate HEADER DO WN switch
on GSL to lo wer header fully. Stop engine, and
remove key.
m. Connect header drive hydraulics and electrical
harness to h eader. Refe r to your Rotary Disc
Header Unloading and Assembly Instructions.
Form 169542
UNLOADING AND ASSEMBLY
A
F
G
68
Revision F
Advertisement
Table of Contents
