Table of Contents
Advertisement
CAUTION
Check to be sure all bystanders have cleared
the area.
HEADER UP
HEADER DOWN
l.
Start engine, and activat e HEADER DOWN
switch on GSL to lowe r header fully. Stop
engine, and remove key.
WARNING
Stop windrower engine, and remove key
before making adjustments to machine. A
child or even a pet could engage the drive.
m. Connect header drive hydraulics and electrical
harness to header. Refer to your Rota ry Disc
Header Operator's Manual.
Form 169542
UNLOADING AND ASSEMBLY
STEP 28. LUBRICATE MACHINE
Recommended Lubricant
86
SPEC
DESCRIPTION
High Temperature
Extreme Pressure (EP2)
Performance With 1% Max
SAE Multi-
Molybdenum Disulphide
Purpose
(NLGI Grade 2)
Lithium Base
a. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
b. Inject grease through fitting with grease gun until
grease overflows fitting, except where noted.
c. Leave excess grease on fitting to keep out dirt.
d. Replace any loose or broken fittings immediately.
e. If fitting will not take grease, remove and clean
thoroughly. Also clea n lubricant passageway.
Replace fitting if necessary.
f.
Refer to the following illustrations to identify the
various locations requiring lubrication.
USE
As Required
Unless Otherwise
Specified
(continued next page)
Revision F
Advertisement
Table of Contents
