g. Remove caps from the hoses only.
h. Remove one cap on tee fitting, and quickly attach
hose to minimize oil spillage.
i.
Remove second cap from tee, a nd quickly
connect other hose.
j.
Tighten fittings.
k. Locate hose bundle from valve blocks on LH si d e
of frame. Route h
harness through hose support.
Form 169542
UNLOADING AND ASSEMBLY
ose ends with electrical
l.
Disengage hook, and rotate to up
Position hose bundle over hose support, and
locate under hook. Rotate hook, and re-engage
in bracket.
m. Attach reel hose support tube to the RH reel leg
with two 3/8 in. x 1.0 carriage bolts and nuts.
36
position.
Revision F