Table of Contents
Advertisement
h. Disconnect electrical connection at fuel pump on
right side of engine.
i.
Open circuit breaker/fuse box, and remove ECM
ignition fuse (5A).
CAUTION
Check to be sure all bystanders have cleared
the area.
j.
To prime the system, crank engine with starter f or
15 seconds.
k. Re-connect electrical connection at fuel pump
and at brake engage solenoid.
l.
Re-install ECM ignition fuse, and close fuse box.
Form 169542
UNLOADING AND ASSEMBLY
52
m. Close engine compartment hood.
n. Check hydraulic oil level in re servoir.
necessary, add SAE15W-40 oil.
If
Revision F
Advertisement
Table of Contents
