Table of Contents
Advertisement
B. M155, M105
a. Open engine compartment hood.
b. Retrieve exhaust stack that wa s previously
removed.
A
D
c. Loosen clamp (A) on exhaust stack (B), and
clamp (C) on muffler (D).
B
E
d. Position stack (B) in slot in exhaust shroud (E),
and connect stack (B) and clamp (A) to muffler
(D).
Form 169542
UNLOADING AND ASSEMBLY
B
C
F
If shroud (E) interferes with the stack,
loosen the wing-nut (F) on the shroud,
and move the shroud so that stack can
be installed.
D
C
e. Tighten both clamp s (A) and (C), but o nly just
enough so stack can be moved.
f.
Slowly close hood so that stack (B) enters hole
(G) in hood. Adjust the position of the stack a s
required to clear the hole in the hood.
g. Raise the hood.
h. Tighten clamps (A) and (C).
i.
Re-position shroud (E), and tighten wing-nut (F).
44
NOTE
A
B
G
Revision F
B
Advertisement
Table of Contents
