Table of Contents
Advertisement
CAUTION
Check to be sure all bystanders have
cleared the area.
HEADER
TILT DOWN
HEADER DOWN
b. Start the en gine, and activate HEADER DOWN
button on th e GSL to fu lly retract header lift
cylinders.
E
B
c. Slowly drive windrower forward so that feet (E) on
windrower enter boot s (B) on the
Continue to drive slowly forward until feet engage
the boots, and header nudges forward.
Form 169542
UNLOADING AND ASSEMBLY
HEADER UP
HEADER TILT UP
header.
REEL DOWN
HEADER UP
HEADER
TILT DOWN
d. Adjust the position of the center-link cylinder with
the REEL UP and REEL DOWN switches, and
HEADER TILT switches on the GSL to position
the hook above the header attachment pin.
e. Lower the center-link onto the header with REEL
DOWN switch until it locks into position (handle is
down).
f.
Raise the h eader fully with the HE ADER UP
switch on the GSL. Stop engine and remove key.
DANGER
To avoid bodily injury from fall of raised
header,
always
cylinder stops when working on or
around raised header.
g. Engage lift cylinder stops on both lift cylinders.
64
REEL UP
HEADER TILT UP
engage
header lift
(continued next page)
Revision F
Advertisement
Table of Contents
