Table 24: Example Of A Completed Stack Worksheet - Allied Telesis AlliedWare Plus x950 Series Installation Manual

Switch/
Switch
Location
Master AT-x950-
28XSQ
Bldg 2A
rm:304
Table 23. Stacking Worksheet Columns (Continued)
Column
Firmware Version
Number
Trunk Ports
Transceivers in
Slots 25 to 37
AT-XEM2 Slot
Table 24 is an example of a completed worksheet.
Table 24. Example of a Completed Stack Worksheet
Switch Prior-
ID ity
1 1
Description
Use this column to record the version numbers of
the AlliedWare Plus management software on the
switches. The switches might not be able to form
the stack if they have different versions. Switches
that have different versions should be updated to
the most recent release before you build the
stack. The configuration instructions explain how
to view the version numbers.
Use this column to enter the trunk ports. You
should choose the ports before beginning the
configuration procedures. Refer to "Stack Trunks"
on page 56.
Used this column to record the transceiver
speeds for slots 25 to 37. The possible speeds
are listed here:
- 40Gbps
- 100Gbps
- 10Gbps breakout cable
Use this column to enter the model names of the
AT-XEM2 Line Cards, if present, in the expansion
slots.
Firmware
Trunk
Version
Ports
Number
v5.4.9-0 33, 37
x950 Series Installation Guide for VCStack
Transceivers
AT-XEM2
in Slots
Card
25 to 37
25: empty none
29: 40Gbps
33: 100Gbps
37: 100Gbps
75