Stacking Worksheet; Table 19: Stacking Worksheet; Table 20: Stacking Worksheet Columns - Allied Telesis AT-x550-18XTQ Installation Manual

Chapter 2: Virtual Chassis Stacking

Stacking Worksheet

Switch Model/
Switch
Master
Member
Member
Member
76
Configuring and maintaining a stack will be easier if you use the worksheet
in Table 19.
Table 19. Stacking Worksheet
ID
Location
1
2
3
4
The table columns are described in Table 20.
Table 20. Stacking Worksheet Columns
Column
Location
ID
AW+
Priority Version
Number
1
2
3
4
Description
You use this column to write down the physical
locations of the devices, such as their buildings
or equipment rooms. The information can be
useful in locating the switches of the stack if they
are in different locations.
Each switch in a stack has to have a unique ID
number, in the range of 1 to 4. They display the
numbers on the ID LEDs on the front panels and
you use the numbers to configure the individual
ports. Allied Telesis recommends assigning the
ID 1, the default value, to the master switch. You
should decide ahead of time, before beginning
the configuration procedures, the ID assignments
of the switches.
Trunk Ports