Stacking Worksheet; Table 4: Stacking Worksheet; Table 5: Stacking Worksheet Columns - Allied Telesis XS900MX Series Installation Manual

Stacking Worksheet

Switch Model
Switch
Location
Master
Member
1. AT-XS916MXT and AT-XS916MXS Switches
2. AlliedWare Plus
3. AT-StackXS/1.0 stacking cable, AT-SP10TW1 or AT-SP10TW3 Direct Attach Cable, or twisted pair cable.
Configuring and maintaining a stack will be easier if you use the worksheet
in Table 4.
Table 4. Stacking Worksheet
1
/
ID Priority
1 1
2 2
The table columns are described in Table 5.
Table 5. Stacking Worksheet Columns
Column
Location
ID
XS900MX Series Installation Guide for VCStack
2
AW+
Version
Number
Description
You use this column to write down the physical
locations of the devices, such as their buildings
or equipment rooms. The information can be
useful in locating the switches of the stack if they
are in different locations.
Each switch in a stack has to have a unique ID
number of 1 or 2. They display the numbers on
the ID LEDs on the front panels and you use the
numbers to configure the individual ports. Allied
Telesis recommends assigning the ID 1, the
default value, to the master switch. The member
switch should be assigned the ID 2.
Trunk
Trunk
3
Ports
Cables
45