Usb Memory Interface - NF DP060LM Instruction Manual

RS232 interface *69 *70
Item
Terminal
Baud rate
Terminator
Parity
Stop bit
Data bit
Flow control
*69：Binary transmission is not supported.
*70：Use a cross cable.
GPIB interface (IEEE488.1 std 1987) *71 *72
Item
Address
Terminator
*71：Binary transmission is not supported.
*72：Query for the main unit status byte using a serial poll is not supported.
LAN interface (IEEE802.3, LXI 1.4 Core 2011) *73
Item
Terminal
Transmission method
Communication protocol
Terminator
IP address setting
*73：Binary transmission is not supported.

11.29 USB Memory Interface

Commercial USB memory sticks can be used.
Available memory
Connector
Format
Writable/readable
contents
File operation
*74：We do not guarantee that all USB memories can be operational with this product.
*75：The time stamp recorded on a file is different from the actual date and time.
DP060LM/DP120LM/DP180LM
Description or Selection
D-sub 9-pin (male, UNC #4-40 screw)
9600 / 19200
"CR" "LF" / "CR" / "LF"
None/Odd/Even
1 / 2
7 / 8
None/Hardware/Software
Description or Selection
0 to 30
"LF"
Description or Selection
RJ-45 modular jack
Ethernet(100BASE-TX / 10BASE-T)
SCPI-RAW
"LF"
Auto, Fixed
*74 USB 1.1 or USB 2.0-compliant product
USB-A (front panel)
FAT32
Basic Setting Memory, Sequence, Simulation, arbitrary wave
*75 Create dedicated directory, rename, load, and save
2-byte characters (Japanese, etc.) are not supported.
11.29 USB Memory Interface
Factory default
9600 bps
"CR" "LF"
None
1 bit
8 bit
None
Factory default
2
Factory default
Auto
Description
275