Power Cable; Table 7-3 Power Cable Model Names - NF DP060LM Instruction Manual

7. Options
7.4

Power Cable

Cables for the power input. They vary in cross sectional area depending on the power input and the
rated output as shown in Table 7-3. A crimp-type terminal is attached to each cable on the end which
is to be connected to the input terminal of this product. The length of the cable is 3 m.
 On the power cable, the end which is to be connected to the distribution board has no terminal
attached. Use a crimp-type terminal appropriate for the terminal screw diameter of the
distribution board to connect the cable firmly.
 The power cable is dedicated only to this product. Do not use it with any other product.
Model name Power input
PA-001-3252 Single-phase
input (1P2W)
PA-001-3254
PA-001-3256 Three-phase
three-wire
PA-001-3258
input (3P3W)
PA-001-3259
PA-001-3263 Three-phase
four-wire
PA-001-3264
input (3P4W)
PA-001-3265
220

Table 7-3 Power Cable Model Names

Rated output
6.0 kVA
12.0 kVA
6.0 kVA
12.0 kVA
18.0 kVA
6.0 kVA
12.0 kVA
18.0 kVA
Maximum
Terminal
power
size
consumption
9.00 kVA M6
18.00 kVA M8
9.00 kVA M6
18.00 kVA M8
27.00 kVA M10
9.00 kVA M6
18.00 kVA
27.00 kVA M10
PROGRAMMABLE AC POWER SOURCE
Nominal cross
sectional area
2
14 mm approx
2
38 mm approx
2
14 mm approx
2
22 mm approx
2
38 mm approx
2
5.5 mm approx
2
14 mm approx
2
22 mm approx