Remote/Local State Switching; Remote State; Local State - NF DP060LM Instruction Manual

6. Remote Control
MAC Address： Device-specific address (physical address). It cannot be changed. It is 8 bit
IP Address：
Subnet mask： You can check the mask that separates the upper network address and the lower
Gateway：
-------- Notes ------------------------------------------------------------------------------------------------------------
 Avoid use in a place under electrically noisy environment.
 Turn off this product and the computer before connecting or disconnecting the cable.
 Binary transmission is not supported.
-----------------------------------------------------------------------------------------------------------------------------
6.2

Remote/Local State Switching

6.2.1

Remote State

In the Remote state, the control panel key operations are not accepted. However, the output off
(OUTPUT key) and the switching to the Local state (
 Switching to the Remote state
When communication is established after the command is sent from the computer to this product, this
product switches to the Remote state.
6.2.2

Local State

Control panel key operations are accepted.
 Switching to the Local state
The Shortcut operation
216
delimited, hexadecimal notation.
In IP (Internet Protocol), you can check the address (logical address) for
identifying the device. The range from 192.168.0.0 to 192.168.255.255 is a
private IP address that you can freely use in a small local network (Class C).
host address from the IP address.
When accessing an external network, you can check the IP address of the
gateway (repeater) to use implicitly.
+ switches to the state to Local.
+ ) are accepted.
PROGRAMMABLE AC POWER SOURCE