Usb Memory Interface; Waveform Monitor Output - NF DP420LS Instruction Manual

GPIB interface (IEEE488.1 std 1987) *60 *61
Item
Address
Terminator
*60: Binary transmission is not supported.
*61: Query for the main unit status byte using a serial poll is not supported.
LAN interface (IEEE802.3, LXI 1.4 Core 2011) *62
Item
Terminal
Transmission method
Communication protocol
Terminator
IP address setting
*62: Binary transmission is not supported.

11.28 USB Memory Interface

Commercial USB memory sticks can be used.
Available memory
Connector
Format
Writable/readable contents
File operation
*63: We do not guarantee that all USB memories can be operational with this product.
*64: The time stamp recorded on a file is different from the actual date and time.

11.29 Waveform Monitor Output

This can monitor the waveform of the output voltage or current. (only one terminal)
For Number of working power units, see 11.12.
Number of
working
power units
Monitored
Gain Phase
voltage
(V/V)
Phase
current
(V/A)
Accuracy *65 5 %
Output terminal
Output impedance
*65: No load on the monitor output, the rated output voltage, the resistance load at the maximum
current.
DP420LS/DP480LS
Description or Selection
0 to 30
"LF"
Description or Selection
RJ-45 modular jack
Ethernet(100BASE-TX / 10BASE-T)
SCPI-RAW
"LF"
Auto, Fixed
*63 USB 1.1 or USB 2.0-compliant product
USB-A (front panel)
FAT32
Basic Setting Memory, Sequence, Simulation, arbitrary wave
*64 Create dedicated directory, rename, load, and save
2-byte characters (Japanese, etc.) are not supported.
8, 7
Output phase voltage or output phase current (switched)
1 1
/
200 400
1 1 1
/
1200 600 900
BNC connector (rear panel, unbalanced)
600 
Description
Single
6, 5 4, 3
1 1
/ /
450 600 300
11.28 USB Memory Interface
Factory default
2
Factory default
Auto
2, 1
1 1 1
/
300 150
259