Status Icon; Table 5-2 Status Icons - NF DP060LM Instruction Manual

5.1.1

Status Icon

Table 5-2 shows icons displayed in specific states and their meanings.
Icon
Rated power
AGC
Autocal
Busy
RMS current limiter
Peak current limiter
Active wattage limiter
Synchronization
Asynchronous
Key lock
Remote
Editing
Running
Stand by
Sequence suspended
Unadjusted
DP060LM/DP120LM/DP180LM

Table 5-2 Status Icons

Name
Indicates the maximum output power. If the
rated power is restricted by the power unit
energization setting, the icon is displayed
inverted (Example:
The AGC setting is on.
The Autocal is on.
The product does not accept key operations
for changing the setting as it is performing
the internal processing. Please wait for a
moment.
The RMS current limiter is activated.
The peak current limiter is activated.
The active wattage limiter is activated.
With SYNC, the internal signal source is
synchronized with the external signal or the
power line.
With SYNC, the internal signal source is
not synchronized with the external signal or
the power line.
The key lock is enabled.
In the Remote control state.
The edit view for the sequence or simulation
is displayed.
The sequence or simulation is running.
The sequence or simulation stands by.
The sequence is suspended.
Unadjusted. This icon means the abnormal
state of the product. Contact us or our agent.
5.1 Screen Configuration
Meaning
).
Refer to
3.2.6,
4.23
4.12
4.13
—
4.1.2
4.1.1
4.1.5
4.19
4.19
4.24
6.
4.2.12,
4.3.12
4.2.12,
4.3.12
4.2.12,
4.3.12
4.2.12,
4.3.12
—
199