NF DP060LM Instruction Manual page 178

4. Advanced Operation
 Turning on/off Remote sensing function
1. Press the [Measure] soft-key, then select [2: Measure].
2. Use the [Rmt Sense] item to switch ON / OFF / FB, if necessary.
3. When setting Remote sensing to ON or FB, the item symbol of the output voltage measured
value is changed to "SV".
-------- Notes ------------------------------------------------------------------------------------------------------------
 The Remote sensing function can be set to ON / OFF / FB also in the AGC/Autocal set
window.
-----------------------------------------------------------------------------------------------------------------------------
160 PROGRAMMABLE AC POWER SOURCE