4. Advanced Operation
2. In the [Mode] item, select [1: Unbalance]. The mode is switched to the unbalanced mode.
3. To unbalance the phase, set the phase in the [L1-L2] and [L1-L3] items. When the setting is
completed, close the window.
4. To unbalance the phase voltage, press the [Osc] soft-key and select [5: Target Phs], and then
select the phase to set the phase voltage. Or perform the Shortcut operation
switch the phase to set. Set the phase voltage in [ACV].
170
PROGRAMMABLE AC POWER SOURCE
+
to