System Menus; Table 5-9 System Menus - NF DP060LM Instruction Manual

5.2.5

System Menus

The System menus are shown in Table 5-9.
Menu
Reset
PwOn Mode
PwON Output
Beep
LCD
Monitor
Ext Control
Remote
Relay Cntrl
USB Eject
Trig Out
PU-ON
Information
ExtOut Pol
OutPhsMd
DP060LM/DP120LM/DP180LM

Table 5-9 System Menus

Resets the system.
Selects the output function
(Continuous/Sequence/Simulation) at power-on.
Enables/disables the function to turn on the output at
power-on.
Turns the beep sound on or off.
Sets the screen color and the contrast.
Makes the Monitor function settings.
Switches the control by the external control function to
Enable/Disable/DevCtrl.
Makes the communication interface settings.
Enables/disables the output relay to coordinate with the
output on/off.
Disconnects the USB memory before removing it.
Makes the trigger output settings in the Sequence and the
Simulation.
Makes the power unit energization settings.
Displays the system information.
Specifies the external control state output polarity.
Sets the output phase configuration.
Description
5.2 Menu Composition
Refer to
4.27
4.2.10,
4.3.10
4.22
4.25
4.26
4.10
4.18
6.1
4.21
4.9
4.2,4.3
4.23
10.4
4.18.1
3.4.1
205