Setting Range Limit Function - NF DP060LM Instruction Manual

11. Specifications

11.15 Setting Range Limit Function

This is the limit function for the setting of the internal signal source. It works when the signal source
is INT, VCA (frequency setting limit only), SYNC (voltage setting limit only), or ADD (internal
signal source only). The limitation does not work for the Sequence and Simulation. It does not also
work for the external signal source of EXT and ADD.
In the polyphase output, the setting is common to all the phases.
Voltage setting limit 1 (in the AC mode, and sine wave or clipped sine wave is selected)
Setting range
(effective value)
Factory default
Resolution
*46：The line voltage setting is available only when the output voltage setting is set as the line voltage
and sine wave is selected in the balanced mode of the polyphase output.
Voltage setting limit 2 (other than Voltage setting limit 1, phase voltage setting only) *47
Positive Setting Range
(Peak value)
voltage
Factory
default
Setting Range
Negative
(Peak value)
voltage
Factory
default
Resolution
*47：The limitation is applied to the additional values of the AC voltage setting (recalculated to a peak
value) and the DC voltage setting.
Frequency setting limit (the lower limit  the upper limit) *48
Upper Setting Range
limit
Factory
default
Lower Setting Range
limit
Factory
default
Resolution
*48：In the AC mode, the setting range is 40.00 Hz to 550.00 Hz.
262
Single-phase output
DP060LM DP120LM DP180LM DP060LM DP120LM DP180LM
Phase voltage setting
0.1 V to 160.0 V / 0.1 V to 320.0 V
*46
－
Phase voltage setting, 160.0 V/320.0 V
Phase voltage setting：0.1 V
－
+0.1 V to +227.0 V / +0.1 V to +454.0 V
+227.0 V / +454.0 V
227.0 V to 0.1 V / 454.0 V to 0.1 V
227.0 V / 454.0 V
0.1 V
1.00 Hz (AC mode : 40.00 Hz) to 550.00 Hz
550.00 Hz
1.00 Hz (AC mode : 40.00 Hz) to 550.00 Hz
1.00 Hz (AC mode : 40.00 Hz)
0.01 Hz
Polyphase output
Line voltage setting (single-phase
three-wire)
0.2 V to 320.0 V / 0.2 V to 640.0 V
Line voltage setting (three-phase
four-wire)
0.2 V to 277.2 V / 0.2 V to 554.2 V
Line voltage setting：0.2 V
All models
All models
PROGRAMMABLE AC POWER SOURCE