Operation procedure
1. Push [Limiter] soft-key to select 1: Ipk Limiter (or push
current limiter set window.
2. In the [+Iop]/[Iop] item, set the peak current limiter value of positive/negative.
3. Set the [Output OFF] item as [Enable] or [Disable]. When setting to [Enable], also set the time
from the start of limiter operation to the output off.
4. Close the window.
DP060LM/DP120LM/DP180LM
4.1 Using Limiter, Setting Limiter
+
). Opens the peak
65