SEQ Recall
In the Memory View, select [SEQ Recall] to change to the Sequence Recall View as below, allowing
you to load the sequence. For the operation method, see 4.2.6.
4.8.4
Simulation Memory
The user-created simulation can be saved in the Simulation Memory.
Both the internal and USB memories can be selected as the Simulation Memory. Creation and saving
of a simulation are performed using the simulation menu (see 4.3) or the control software in the
attached CD-ROM. For the content saved in the Simulation Memory, see Table 4-10.
The internal memory has 5 Simulation Memories from No. 1 to No. 5.
Setting Item
Output range selection
Simulation Function Parameters
SIM Store
In the Memory View, select [SIM Store] to change to the Simulation Save View as below, allowing
you to save, clear, and rename the simulation. For the operation method, see 4.3.8 and 4.3.9.
DP060LM/DP120LM/DP180LM
Table 4-10 Content Saved in Simulation Memory
Factory default setting
100V
See 4.27
4.8 Using Memory Function
153