Turning off the AGC function
1. Open the AGC/Autocal set window. Following two methods are available.
(a) Shortcut operation:
(b) Push the [Misc] soft-key and select [1: AGC/Auto Cal].
2. In the [AGC] item, select [1: OFF]. When [OFF] is selected here, the AGC calibration finishes.
3. Use the [Rmt Sense] item to set the Remote sensing function to on or off, if necessary.
4. Close the window.
DP060LM/DP120LM/DP180LM
+
4.12 Using AGC Function
163