Overview; Series Lineup; Figure 1-1 Model Naming System; Table 1-1 Series Line-Up - NF DP060LM Instruction Manual

1. Outline
1.1

Overview

Programmable AC power source DP060LM/DP120LM/DP180LM are multi-phase programmable
AC power source which inherit the performance and the function of DP series and support reverse
power flow* for a short time. This product can be switch to single-phase mode, single-phase
three-wire mode, and three-phase four-wire mode. It provides various interfaces such as the external
control input/output, communication interface and remote controller, and the program function such
as sequence and simulation to address a wide variety of usage.
* It is to be noted that regeneration from the load is described as "reverse power flow" in this
manual. Also, it is to be noted that DC regeneration is described as "sink current" and DC
power running is described as "source current".
1.2

Series Lineup

This product operates single-phase model or polyphase model of the output capacity shown in Table
1-1 when setting output phase configuration. The model naming system is shown in Figure 1-1.
Output phase
configuration setting
（Single-phase two-wire）
（Single-phase three-wire）
（Three-phase four-wire）
* It is not compatible with polyphase system connection using DP series option system cable.
D P 0
2

Table 1-1 Series Line-up

Cabinet type
1P2W*
1P3W
3P4W
6 0 L M

Figure 1-1 Model Naming System

DP060LM DP120LM
Type2L Type4L
6 kVA 12 kVA
4 kVA 8 kVA
6 kVA 12 kVA
Series name: DP
Rated output power
060: 6 kVA 120: 12 kVA 180: 18 kVA
Type L
Output phase configuration
M: Multi-phase
PROGRAMMABLE AC POWER SOURCE
DP180LM
Type5L
18 kVA
12 kVA
18 kVA