Gpib - NF DP060LM Instruction Manual

6. Remote Control
5. Use a D-sub 9-pin cross cable to connect this product to the computer. The connector is on the
rear of this product.
-------- Notes ------------------------------------------------------------------------------------------------------------
 Avoid use in a place under electrically noisy environment.
 Turn off this product and the computer before connecting or disconnecting the cable.
 Binary transmission is not supported.
-----------------------------------------------------------------------------------------------------------------------------
6.1.3

GPIB

This product is compliant with the GPIB IEEE Standard 488.1-1987. The GPIB-based remote control
is available. For the interface specifications, see 11.28.
 Operation procedure
1. Press the MENU key to move to the root menu, and then select [System]. The system setting
window opens.
2. Put the cursor on [Setup] next to the [Remote] item, then press the ENTER key. The remote
setting window opens.
212 PROGRAMMABLE AC POWER SOURCE