Set So As The Simulation Function Is Selected At Power-On - NF DP060LM Instruction Manual

4.3.10

Set so as the Simulation Function is Selected at Power-on

You can set so as the Simulation function is selected at power-on.
 Operation procedure
1. Press the MENU key to move to the root menu, then select [System]. The system setting
window opens.
2. In [PwOn Mode] item, Select [3: Sim].
-------- Notes ------------------------------------------------------------------------------------------------------------
 To set so as to Continuous function is selected at power-on, select [1: Cont] in [PwOn Mode]
item.
-----------------------------------------------------------------------------------------------------------------------------
DP060LM/DP120LM/DP180LM
4.3 Using Power Fluctuation Testing (Simulation) Function
125