Storage, Repackaging, Transportation; Checking Firmware Version - NF DP060LM Instruction Manual

10. Maintenance
10.3

Storage, Repackaging, Transportation

This product shall be stored in a location that satisfies the installation conditions (see 2.2).
 Storage when unused for a long time
 Remove the power cable from the distribution board and the product.
 Store the product in a place with no falling object or dust. If it may be covered with dust, put the
cover, such as cloth and polyethylene sheet, on it.
 Avoid a place exposed to rapid temperature change or direct sunlight. Store it under a normal
temperature environment wherever possible. For the storage condition, see 11.32.
 Repackaging and transportation
Follow the instructions below when repackaging the product due to transfer or repair.
 In order for the main unit to be sufficiently protected from impact during transportation, pack it
with a shock absorber such as AirCap.
 When requesting transportation, instruct the carrier that this product is a precision equipment.
 Be sure to include the instruction manual at transportation.
10.4

Checking Firmware Version

 Operation procedure
1. Press the MENU key to move to the root menu, then select [System]. The System menu opens.
244 PROGRAMMABLE AC POWER SOURCE