2.7.8
DESIGNATED SIGNIFICANT ZONES OF OCCUPANCY
OPERATOR CONTROL
PROTECTED AREA /
NO RADIATION AREA
.
Note
0242F EN 20181218
X-ray equipment specified for examination that do not need the operator or staff
to be close to the patient during normal use shall be provided with means to
allow the following control functions from a "Protected Area" (refer to illustration
below):
Selection and control of modes of operation.
Selection of loading factors for the exposure.
Actuation of the exposure controls.
Other necessary controls for the operator during exposure.
Generator
PATIENT
ENVIRONMENT
Patient environment center position depends on the Tube position
in the exam room.
Table Base
EXAM ROOM
DX-D 600
User Manual
27