AGFA DX-D 600 User Manual page 134

DX-D 600
User Manual
Illustration 6-8
Right load configuration of the Wall Stand for Double Panel System
1
Illustration 6-9
Left load configuration of the Wall Stand for Single Panel System
1
126
Rotation direction changes depending on the Systems Configuration:
For Double Panel Systems or default configuration, rotate always the DR

Detector before tilting it. The rotation will be upwards, clockwise for the
left load configuration of the DR Detector, or counter-clockwise for the
right load.
For Single Panel Systems, Tilt always the DR Detector before rotating it.

The rotation will be downwards counter-clockwise for the left load
configuration of the DR Detector, or clockwise for the right load.
2
2 3
3
0242F EN 20181218