AGFA DX-D 600 User Manual page 49

Hide thumbs Also See for DX-D 600:
Table of Contents

Advertisement

AND MOBILE RF COMMUNICATIONS EQUIPMENT AND THE X-RAY SYSTEM
This DX-D 600 Radiographic Room is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of this DX-D 600 Radiographic Room can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the DX-D 600
Radiographic Room as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power of transmitter
Rated maximum output power of transmitter
W
0.01
0.1
1
10
100
GMRS device (Professional Walkie- -Talkie): 5 W @ 462- -467 MHz
GSM / UMTS cell phone: 2 W @ 850/1700/1900 MHz
FRS device (Amateur Walkie- -Talkie): 500 mW @ 462- -467 MHz
WiFi / Bluetooth devices: 100 mW @ 2400- -2500 MHz
DECT devices (modern cordless phones): 100mW @ 1880- -1900 MHz
RFID reader (3): 10 mW @ 125- -150 KHz / 13.56 MHz
RFID reader (3): 10 mW @ 902- -928 MHz / 2400- -2500 MHz
Station transmitter ATSC TV broadcasting: 100 kW @ 54- -800 MHz
Station transmitter ATSC TV broadcasting: 100 kW @ 800- -890 MHz
Station transmitter FM radio broadcasting: 100 kW @ 87.5- -108 MHz
For transmitters rated at a maximum output power not listed above, the recommended separation distance 'd' in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter, where 'P' is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
NOTE 1 - - At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 - - These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
0242F EN 20181218
RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE
(IEC 60601-1-2:2007)
150 KHz to 80 MHz
TYPICAL RF DEVICES (Worst-Case scenario)
Device: Power @ Frequency
Separation distance according to frequency of transmitter
80 MHz to 800 MHz
d = 1.2 P
d = 1.2 P
0.12
0.38
1.2
3.8
12
User Manual
m
800 MHz to 2.5 GHz
d = 2.3 P
0.12
0.23
0.38
0.73
1.2
2.3
3.8
7.3
12
23
Recommended
distance(m)
2.7
3.3
0.9
0.8
0.8
0.12
0.23
380
730
380
DX-D 600
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents