AGFA DX-D 600 User Manual page 121

5.6.2 COMPRESSION BAND
Illustration 5-6
Compression Band Operation
5.6.3 LATERAL CASSETTE HOLDER
Illustration 5-7
Lateral Cassette Holder placement
0242F EN 20181218
This device supplies compression to the anatomical area of interest in order to
avoid unnecessary movements.
It is mounted on the Tabletop rails. Fit totally both brackets of the Compression
Band to the rails and use the lever lock or unlock the Compression Band to get
the required extension of the Band.
Lock & Pick Up the Band
The Lateral Cassette Holder is used for Table lateral work, including knee,
shoulder, skull, etc.
This Lateral Cassette Holder is placed directly on the Tabletop. It can be
adjusted to hold all standard Cassette sizes and to perform X-ray exams at
different heights.
Its adjustable rails are used to easily insert or remove the Cassette and, at the
same time, to hold it tight while the X-ray examination is taking place.
Adjust the height using the knobs to raise or lower the rails and tighten the knobs
to secure the Cassette. Position the patient and place the Lateral Cassette
Holder on the Tabletop behind the patient, in the desired position, to perform
the radiographic exam.
Knobs
Unlock
DX-D 600
User Manual
113