AGFA DX-D 600 User Manual page 154

DX-D 600
User Manual
Table 8-2 (Cont.)
Ceiling Suspension Motor Controller Boards
CODE USER ERROR MESSAGE
Operative rejected: CS-Transversal
position out of calibrated range:
11113
Right there, only MANUAL
movement allowed
11114 Board failure: CS-Transversal
End-Switch Limit:
11116
CS-Transversal
Operative rejected: CS-Vertical
position out of calibrated range:
11117
Right there, only MANUAL
movement allowed
11118 Board Failure: CS-Vertical
11119 End-Switch Limit: CS-Vertical
Operative rejected: CS-Angular
position out of calibrated range:
11120
Right there, only MANUAL
movement allowed
146
ERROR DESCRIPTION
Axis moved out of
defined range manually.
Axis not calibrated.
Potentiometer misaligned.
Potentiometer or Potentiometer
Circuitry defective.
A/D converter problem
No motor power or
motor/driver defective.
Potentiometer/Tachometer or
circuitry defective.
Coupling did not engage
Axis moved out of
defined range manually.
Axis not calibrated.
Potentiometer misaligned.
Potentiometer or Potentiometer
Circuitry defective.
A/D converter problem
Axis moved out of
defined range manually.
Axis not calibrated.
Potentiometer misaligned.
Potentiometer or Potentiometer
Circuitry defective.
A/D converter problem
No motor power or
motor/driver defective.
Potentiometer/Tachometer or
circuitry defective.
Coupling did not engage
Axis moved out of
defined range manually.
Axis not calibrated.
Potentiometer misaligned.
Potentiometer or Potentiometer
Circuitry defective.
A/D converter problem
Axis moved out of
defined range manually.
Axis not calibrated.
Potentiometer misaligned.
Potentiometer or Potentiometer
Circuitry defective.
A/D converter problem
ACTION
Check position feedback
Contact Service
Change board
Check End Switch Limit position,
activation, operation.
Check End Switch Limit range
Check position feedback.
Contact Service
Change board
Check End Switch Limit position,
activation, operation.
Check End Switch Limit range
Check position feedback
Contact Service
0242F EN 20181218