AGFA DX-D 600 User Manual page 140

DX-D 600
User Manual
Illustration 6-16
Overhead Hands Support Working and Parking Position
Working Position
Illustration 6-17
Overhead Hands Support Tilting Procedure
Initial Position
132
The Patient Support can be used in two different positions: Working position,
o
at 0 , and Parking, at +90
the Support to the opposite of the DR Detector loading configuration.
To tilt down the Patient Support, pull out the Tilting Locking Pin and then rotate
the Holder Support. Use the Locking Pin to fix it. There are two different tilting
positions available, at 30
o
--50 when the Holder is at the right.
o o
or -90 . Pull out the Parking Locking Pin and turn
Parking Position
o o
and 50 when the Holder is at the left and at --30
Tilting Position
o
and
0242F EN 20181218