AGFA DX-D 600 User Manual page 159

Table 8-5
Positioning
CODE USER ERROR MESSAGE
11501 Auto-center forbidden
11502 Auto-tracking forbidden
11503 Parking forbidden
11504 Demand mismatch
Operative rejected: SID is out of limits
11505 80 cm, 400 cm / 31.5", 157.5": Please,
check POSITION parameters
Operative rejected: Invalid ANG
11506 demand: Please, check POSITION
parameters
Operative rejected: Invalid ROT
11507 demand: Please, check POSITION
parameters
Operative rejected: Invalid Positioner:
11508 Please, check Configuration data and
POSITION parameters
Operative rejected: Invalid Receptor:
11509 Please, check Configuration data and
POSITION parameters
Operative rejected: Please, fix the
11510 Wall Stand-Tilting geometry state to
Detector GRID Rotation: Please, get
11511
the Detector aligned
Operative rejected: Please, fix the
11512
Table-height geometry state
Operative rejected: Table Safety
11513 distance is crossed: Auto-movement
Safety Policy activated
Operative rejected: Wall Stand Safety
11514 distance is crossed: Auto-movement
Safety Policy activated
Tracker HOLD: Detector safety
11515
distance is crossed
11518 Invalid APR demand
Operative rejected: SID is out of limits
11519 80 cm, 400 cm / 31.5", 157.5": Please,
check POSITION parameters
Operative rejected: Auto-center not
allowed for DIRECT workstation:
11520
Please, check WORKSTATION
selection
0242F EN 20181218
Invalid Tube rotation (ROT) demand
Invalid Wall Stand tilting geometry
proceed
Bucky/Detector and Tube not aligned
The Table Safety distance is crossed:
The Wall Stand Safety distance is
Auto-movement Safety Policy activated
Auto-center function is not available
ERROR DESCRIPTION
SID is out of limits
80 cm, 400 cm / 31.5", 157.5"
Invalid Tube angulation (ANG)
demand
Invalid Auto-position/position
configuration
Invalid Receptor configuration
Invalid Table height configuration
Auto-movement Safety Policy
activated
crossed: Auto-movement Safety
Policy activated
Bucky/Detector safety distance is
crossed.
Invalid APR configuration
SID is out of limits
80 cm, 400 cm / 31.5", 157.5"
when DIRECT Workstation is
configured
DX-D 600
User Manual
ACTION
Try again
Try again
Try again
Try again
Check SID parameters in POSITION
Check ANG parameters in POSITION
Check ROT parameters in POSITION
Check POSITION parameters
Check Bucky/Detector Demand
Get aligned the Bucky/Detector
Get aligned the Bucky/Detector
Get the Table at the correct height
Check SID parameters in POSITION
Check SID parameters in POSITION
Check SID parameters in POSITION
Check APR configuration
Check SID parameters in POSITION
Change WORKSTATION
151